Providing Latest Technology to Group of Pottery Artisans (Energy Efficient Kiln) is a Gujarat state scheme that gives registered clay artisans and potter groups a fully subsidized energy-efficient kiln worth ₹83,000. The kiln is provided as equipment, not cash, to improve firing quality, cut fuel costs and reduce the health risks of traditional wood and coal fired furnaces.
Gujarat Matikam Kalakari & Rural Technology Institute (GMKRTI) runs this scheme under the Industries & Mines Department, Government of Gujarat. Using an energy-efficient kiln gives an estimated annual benefit of about ₹70,000 per family. The scheme is open for online application through the eKutir portal, and applications are accepted as per the official guidelines.
Providing Latest Technology to Group of Pottery Artisans (Energy Efficient Kiln)
This scheme helps pottery artisans adopt modern firing technology instead of the traditional polluting kilns. The energy-efficient kiln reduces breakage, improves product quality and lowers fuel costs, so artisans can earn more from the same work.
Under the scheme, energy-efficient kilns are given with 100% government subsidy to potter groups. Earlier one kiln was shared among 4 potter families. Since 2020-21, in villages with fewer than 4 potter families, one kiln is now provided among 2 potter families. This makes the support easier to get for smaller groups.
To qualify, an applicant must be a registered clay artisan or potter aged between 18 and 58 years, directly involved in pottery work, and part of a group of at least 2 artisans. The group must have 800 to 1,000 square feet of open space for the kiln, held on ownership, rent or lease for at least 5 years.
Key Information
| Detail | Information |
|---|---|
| Scheme Name | Providing Latest Technology to Group of Pottery Artisans (Energy Efficient Kiln) |
| Level | State |
| Beneficiary State | Gujarat |
| Scheme For | Individual (applied as a group) |
| Category | Business & Entrepreneurship |
| Benefit Type | Equipment (no cash) |
| Benefit Amount | 100% subsidy on kiln worth ₹83,000 |
| Nodal Department | Industries and Mines Department |
| Application Mode | Online via eKutir portal |
Benefits
The scheme gives a 100% subsidized energy-efficient kiln worth ₹83,000 to eligible potter groups. The kiln is handed over as equipment, so no cash payment is made to the beneficiary.
These modern kilns reduce breakage and improve product quality, which means better returns for the same amount of work. They also lower fuel costs and cut the smoke and heat that harm artisans working with traditional furnaces.
After installation, the group is responsible for all maintenance and repair costs. A usage report must be shared with the institute every 3 months, and the kiln must be used only for pottery work.
Eligibility
To get the benefit of this scheme, an applicant must meet all the conditions given below.
- Must be a registered clay artisan or potter working in Gujarat, directly and actively involved in pottery work.
- Must be aged between 18 and 58 years. There is no income limit.
- Must apply as part of a group of at least 2 potters. Individual applications are not accepted.
- Must have 800 to 1,000 square feet of open space for the kiln, owned, rented or leased for at least 5 years.
- Must be ready to provide land for kiln construction and share the kiln with other group members for firing.
After selection, the group must follow the institute's construction norms and use the kiln only for pottery. A collective guarantee letter on ₹300 stamp paper is required as proof of this commitment.
Documents
Applicants need to keep the following documents ready while filling the online form.
- Required details and certificates as specified in the online application form.
- A notarized guarantee on ₹300 stamp paper stating that the energy-saving furnace will be used by the group.
- Proof of land ownership, rent or lease for the space where the kiln will be built.
- Construction permission or no-objection letter from the Gram Panchayat, Municipality or the concerned authority.
Application Process
The application is submitted online through the eKutir portal of Gujarat. Follow the steps given below to apply.
STEP 1 - Visit the eKutir portal and click on the link for new individual registration on the landing page. Fill in your full name, Aadhaar number, date of birth, mobile number and email, then register.
STEP 2 - After registration, the user ID and password are sent to your mobile number and email. Log in to the portal using these credentials and complete your user profile with the required personal and organisational details.
STEP 3 - On the homepage, select this scheme to open the application form. Fill in all the mandatory fields, upload the required documents and click "Save & Next" to move through the tabs.
STEP 4 - Review all details, agree to the terms and conditions, and submit the final application. Note down the application number shown on screen for future reference and status checks.
For help, call 9909926280 / 9909926180 or contact the District Industries Centre (DIC) of your district. Application status can be checked on the eKutir portal using the application number and date of birth.
References
Energy Efficient Kiln Scheme - GMKRTI Gujarat
Incentives for Cottage and Rural Industries
Cottage & Rural Industries Policy
FAQ's
What is the financial support provided?
The scheme gives 100% support on an energy-efficient kiln worth ₹83,000. The kiln is provided as equipment, not as cash.
What are the age and involvement requirements?
An applicant must be between 18 and 58 years old and directly and actively involved in pottery work.
Can I apply individually?
No. An application must be made as part of a group of at least 2 pottery artisans. Individual applications are not accepted.
What is the minimum land requirement?
The group needs 800 to 1,000 square feet of open space, which can be owned, rented or leased for at least 5 years.
Is there a residency requirement?
Yes. The scheme is only for pottery artisans working within the state of Gujarat.
Who maintains the equipment after installation?
All maintenance and repair costs after installation must be covered by the beneficiary group.
What if the furnace is misused?
Using the furnace for non-pottery activities can lead to legal action by the institute.